250kW MTU Generator
Product Description
Configuration Spec.
1) Powered by brand new original MTU water cooled diesel engine.
2) Brand new STAMFORD, LEROY SOMER or GENLITEC single bearing 3 phase alternator with IP23 and H insulation class.
3) Original MTU 40ºC radiator with engine driven fan mounted on skid.
4) Delixi or Chint branded case circuit breaker mounted.
5) Heavy-duty fabricated steel based frame with built-in fuel tank for at least 8 hours continuous running.
6) Complete set mounted on a based frame with anti-vibration mountings.
7) Industrial 9 dB muffler exhaust system with blexible connects and bellows.
8) Based frame with fuel, oil and coolant drain cocks for easy maintenance.
9) 12/24V DC electric start system with free maintain battery & smartgen brand battery charger.
10) Set mounted automatic control panel, with SMARTGEN brand AMF controller module for automatic start & stop.
11) Test report of generator, set of drawings and manuals.
12) CE, ISO9001 approved
Tech. Data
| Technical data |
| Genset Model |
SAM-250GF |
| Prime Power |
250KW/312.5KVA |
| Rated Voltage |
400/230V |
| Frequency |
50/60Hz |
| Power Factor |
0.8(lagging) |
| The regulating rate of steady voltage |
≤±0.5% |
| The regulating rate of instantaneous voltage |
≤-15%/ +20% |
| The time of steady voltage |
≤1.5sec |
| The waving rate of voltage |
≤1.0% |
| The regulating rate of steady frequency |
≤3% |
| The regulating rate of instantaneous frequency |
≤±10% |
| The time of steady frequency |
3sec |
| Dimension (L×W×H) (mm) |
2800*1150*1650 |
| Genset weight (kg) |
2900 |
| Diesel Engine |
| Brand |
MTU |
| Model |
6R1600G20F |
| Number of Cylinders |
6 |
| Rotating Speed |
1500RPM |
| Cycle |
Four stroke |
| Type |
waste gas turbine boost,direct spurting type |
| Bore×Stroke(mm) |
122*150 |
| Displacement(L) |
10.5 |
| Lubricating Capacity(L) |
46 |
| Speed Governor |
Electrical |
| Cooling System |
Water-cooled |
| Speed Stability (%) |
≤5% |
| Fuel Consumption at 100% Load |
199g/kw.h |
| Starting Method |
DC24V Electrical starting |
| Alternator |
| Brand |
Stamford |
| Model |
HCI444E |
| Number of Phase |
3 |
| Connecting Type |
Three Phase and Four Lines |
| Number of Bearing |
1 |
| Grading Protection |
IP23 |
| Altitude |
≤1000m |
| Exciter Type |
Brushless (AVR automatic voltage regulating) |
| Insulation Class |
H degree |
| The components of the genset |
| (1) MTU Diesel Engine; (2)stamford Alternator; (3) Control Panel |
| Control Panel |
| The control panel is Quadruplication protection control panel, with the display of frequency table/water temperature/schedule/battery voltmeter. The genset with low oil pressure, high water temperature, over speed emergency, stop and other pre-protection. |
Types you can choose
All design for Open, Silent, Trailer, container type generator
Partners
1) Wrap the generator set by stretch film, and put some drying agent.
2) Adopt steel plate or wood rib to make it stronger, can afford rough handling.
3) Design for forklift truck working in 4 directions. Fastened by 8cm length galvanized nail.
4) Load the case into container by forklift truck.
){kind=link}
){kind=link}